7 Steps to Replace Fuel Filters
A little attention and basic knowledge about the fuel supply system will help you follow these Do-It-Yourself (DIY) tips to replace fuel filters easily. When you know that napa 4003 wix 24003 it is time to change this auto part, you should also know how to do so. If you don’t know how to, read on to find it.
Steps to Replace Worn Out Fuel Filter With New One
First Step – The very first step is to relieve the pressure in your fuel lines and fuel filter. For this you need to start the car first carefully pull the fuel pump fuse or fuel pump relay out. This should be done with engine running. This way you can release all the fuel pressure from the fuel lines. Remember, if you don’t release the pressure, explosion can take place while changing the auto part.
Second Step – The next step is to use wrenches to unbolt the fuel filter fittings. Now try sliding the fuel line off the bolt. Also unscrew the bolt on the other side of the auto part. Now that you have taken off the bolts, make sure you keep them properly. You will need them while fixing the new fuel filter.
Third Step – You can now easily remove the old fuel filter. While removing it, you may also find that a small clamp. A screwdriver can be used to release this clamp.
Fourth Step – Closely observe the position of old filter before removing it because you have place the new one in the same position.